From: Gary Bartlett (gary.bartlett@consultant.com)
Date: Thu Aug 28 2003 - 06:21:18 GMT-3
Someone might have a better answer than me, but this is something I've come across before, the link seams stable, there seams to be no conflict in the configs, the only thing that I've been advised to do is to diable CDP on these interfaces & everything seams to continue functionning properly.
I'll monitor this string, I'd be delighted for someone to offer a beter solution
----- Original Message -----
From: "Georg Pauwen" <pauwen@hotmail.com>
Date: Thu, 28 Aug 2003 09:10:16 +0000
To: ccielab@groupstudy.com
Subject: Native VLAN mismatch
> Hello group,
>
> I have a Cisco 2950 connected to a 3550 through a cross-cable on
> FastEthernet0/1 and FastEthernet0/4, respectively.
> On the 2950, I get the following error message:
>
> %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on
> FastEthernet0/1 (0), with switch FastEthernet0/4 (1).
>
> I cannot really figure out how to get rid of this error message, both
> interfaces are in VLAN1. Also, would this mismatch have any impact on the
> connectivity between these two devices ?
> Thanks for your input in advance.
>
> Regards,
>
> Georg
>
> _________________________________________________________________
> MSN Messenger : discutez en direct avec vos amis !
> http://www.msn.fr/msger/default.asp
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
--
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:09 GMT-3