From: Gary Bartlett (gary.bartlett@consultant.com)
Date: Thu Aug 28 2003 - 06:12:08 GMT-3
Hi guys,
I was looking over a lab that I'll be working on & came across a section I'm not to familiar with.
The lab started off by having me configure the same vlan & interface info on both cat3550s, interfaces Fa0/12, Fa0/13 and Fa0/14 into vlans 12, 13 & 14 respectively.
I also assigned the vlans with the following IP's 10.10.12.8/24 on cat1 .9 on cat2, 10.10.13.8/25 on cat1 .9 on cat 2, & 10.10.14.8/24 on cat1 .9 on cat2
I then configured HSRP between each of the vlans to be load balanced
my 2 issues are:
1) it requested that I make cat1 to be the root for vlans 12 & 13, & cat2 to be the root for vlan 14 (not sure if what they would mean by this is to simply give HSRP a higher priority of if it would be some sort of CAT configuration they are asking for)
2) then they asked that i configure Cat1 & Cat2 cross links fa0/22, Fa0/23 & Fa0/24 for load balancing such that Fa0/22 is preferred for vlan 12, Fa0/23 is preferred for vlan 13, & Fa0/24 be preferred for vlan 24 (totally lost on this one...)
--
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:09 GMT-3