From: Danny.Andaluz@triaton-na.com
Date: Tue Aug 26 2003 - 18:09:37 GMT-3
Here is what I have, Mike. And it seems to work just fine. It tells me "no
LDN", but it works fine.
interface BRI0
no ip address
isdn switch-type basic-ni
isdn spid1 000653901
cdapi buffers regular 0
cdapi buffers raw 0
cdapi buffers large 0
End
r5#sh isdn stat
Global ISDN Switchtype = basic-ni
ISDN BRI0 interface
dsl 0, interface ISDN Switchtype = basic-ni
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
TEI 64, ces = 1, state = 8(established)
spid1 configured, no LDN, spid1 sent, spid1 valid
Endpoint ID Info: epsf = 0, usid = 1, tid = 0
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0x80000003
Total Allocated ISDN CCBs = 0
-----Original Message-----
From: miken [mailto:miken@sisna.com]
Sent: Tuesday, August 26, 2003 4:55 PM
To: Andaluz, Danilo, Triaton/NA; l_u_cain@hotmail.com
Cc: ccielab@groupstudy.com
Subject: Re: SPIDs
Larry and Danny,
In the real world if the ISDN switch-type requires spids to be configured, I
always configure both the 10 digit and 7 digit ldn. A debug isdn q931 will
also give you some hints.
isdn spid1 20112345670101 2011234567 1234567
Mike N
----- Original Message -----
From: <Danny.Andaluz@triaton-na.com>
To: <l_u_cain@hotmail.com>
Cc: <ccielab@groupstudy.com>
Sent: Tuesday, August 26, 2003 2:00 PM
Subject: RE: SPIDs
> Larry,
>
> If your spid is: 20112345670101, your ldn (local directory number)
> would
> be: 1234567
>
> Some switch-types require the LDN and others don't. I've configured
> DMS
and
> 5ess switch types with and without the LDN, so I'm not sure if it's
> absolutely required for those. I don't think it is. For others, it
> may
be.
>
> Check the table on the following link. It tells you what the carriers
> provide and require.
>
>
http://cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fdial_c/
> fnsprt3/dcdbri.htm#34306
>
> Danny
>
> -----Original Message-----
> From: Larry Cain [mailto:l_u_cain@hotmail.com]
> Sent: Tuesday, August 26, 2003 3:14 PM
> To: ccielab@groupstudy.com
> Subject: SPIDs
>
>
> Hi Group
>
> What does 'ldn' do after a SPID number?
> Solie says its the 'local directory number' assigned by an SP. Is it
> required for the lab? Does the ISDN used in the USA labs need this to
work?
> What happens if it is
> included and should not have been?
> Solie says it is required if there are incoming calls on 2nd B
> channel.
>
> Many thanks for your help
> Larry
>
> _________________________________________________________________
> Express yourself with cool emoticons - download MSN Messenger today!
> http://www.msn.co.uk/messenger
>
>
> ______________________________________________________________________
> _
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> ______________________________________________________________________
> _
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:07 GMT-3