From: Alec (clapun@graduate.hku.hk)
Date: Sat Aug 23 2003 - 13:10:43 GMT-3
maybe you need to take a look at the parameters after "switchport trunk"
e.g. switchport traunk allowed vlan <VID>
----- Original Message -----
From: "Richard L. Pickard" <nettable_walker@comcast.net>
To: "Ccielab@Groupstudy. Com" <ccielab@groupstudy.com>
Sent: Sunday, August 24, 2003 1:05 AM
Subject: allow only two VLAN's across a 3550 trunk port
> I am working a lab that asks you to configure your 3550 port FE 0/12 as a
> trunk w/ISL & allow only vlan1 & vlan BB2 across
> here is what I have so far -
>
> interface FastEthernet0/12
> description BB_2
> switchport trunk encapsulation isl
> switchport mode trunk
> switchport protected
> duplex full
> speed 100
> end
>
> there is no way to put an argument after "switchport protected"
> what do I need to do to allow only those two vlan's ?
>
> Thanks,
>
> Richard
>
> //
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:05 GMT-3