From: ccie2be (ccie2be@nyc.rr.com)
Date: Fri Aug 22 2003 - 20:05:59 GMT-3
Hey Adam,
I tried adding those commands. Unfortunately, it didn't work :-)
What else could it be? This is suppose to be very simple and to make
matters worse, I'm using the solution config from IPExpert. (This is
e-scenario lab 346).
Do I need to configure any particular commands under line vty 0 4 before
this will work?
Thank, dt
----- Original Message -----
From: "Adam Asay" <aasay@cerberian.com>
To: "ccie2be" <ccie2be@nyc.rr.com>; "Group Study" <ccielab@groupstudy.com>
Sent: Friday, August 22, 2003 6:43 PM
Subject: RE: IP http authentication local
> You need to enable AAA on the router before you can authenticate against
it.
>
> Try adding these commands.
>
> aaa new-model
> aaa authentication login default local
> aaa authorization exec default local
>
> -Adam
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> ccie2be
> Sent: Friday, August 22, 2003 4:16 PM
> To: Group Study
> Subject: IP http authentication local
>
>
> Hi all,
>
> I configured a router with above command and, of course, username dt
> password
> cisco, but I can't access the router via my IE explorer browser version
5.5.
>
> Here's the config:
>
> username dt password cisco
>
> ip http server
> ip http authentication local
>
> I checked that both username and pasword were entered in small case. And,
> if
> I remove the ip http authen local command, I get in without any problem.
> Anybody have any ideas as to why this isn't working?
>
> dt
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:05 GMT-3