From: Morse, Doug W (Doug) (dougmorse@avaya.com)
Date: Fri Aug 22 2003 - 08:59:46 GMT-3
What ever happened to reading and testing your configs (thoroughly) in your lab?
Do you really want to trust what someone else says is correct without seeing the result for yourself?
Douglas Morse CCIE #12016
-----Original Message-----
From: wwwjjang@chol.com [mailto:wwwjjang@chol.com]
Sent: Friday, August 22, 2003 4:25 AM
To: ccielab@groupstudy.com
Subject: DLSW+'s Filtering Question..
Hi..Everyone..
I want to know the differences between "dlsw icanreach" & " dlsw netbios-name".
& My configuration is correct ??
Who knows the difference ??
Thanks...
-------------
My Diagram
-------------
(e0 1.1.1.1)--R1-(s0 2.2.2.1)----(s0 2.2.2.2)-R2-(e0 3.3.3.1)
----------
Question
----------
-Configure dlsw between R1'E0 & R2'E0
-Configure R1 to prevent explorer traffic for host TEST from being sent !!
=> Does This mean that I have to use "Dlsw netbios-name"-command ??
------------
My Solution => Is it right ??
------------
R1>
dlsw local-peer peer-id 2.2.2.1
dlsw remote-peer 0 tcp 2.2.2.2
dlsw bridge-group 1
bridge 1 protocol ieee
dlsw netbios-name IBM remote-peer ip 2.2.2.2 **>is it correct ??
!
interface Ethernet0
ip address 1.1.1.1 255.255.255.0
bridge-group 1
R2>
dlsw local-peer peer-id 2.2.2.2
dlsw remote-peer 0 tcp 2.2.2.1
dlsw bridge-group 1
bridge 1 protocol ieee
!
interface Ethernet0
ip address 3.3.3.1 255.255.255.0
bridge-group 1
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:04 GMT-3