From: boby2kusa@hotmail.com
Date: Tue Aug 19 2003 - 18:44:10 GMT-3
It sounds like an assymetric routing issue. Check the spanning tree and and
check the cam entry make sure it's not anyhting but 300, if it is the cam is
timing out maybe because the packet takes a different path at layer 2 each
time.
----- Original Message -----
From: "Adam Asay" <aasay@cerberian.com>
To: <donny.mateo@sg.ca-indosuez.com>
Cc: <ccielab@groupstudy.com>
Sent: Monday, August 18, 2003 7:47 PM
Subject: Re: Cat 4006 problem
> Donny,
>
> I have heard of this problem happening on 6500's. If it is the same
problem
> you can solve it by changing the cam table and arp table timeouts to
match.
> Try setting the arp table on the L3 module to 5 minutes and see if this
helps.
>
>
> Thanks
> Adam
>
> Donny MATEO wrote:
>
> >Hi Guys,
> >
> >Have any of you ever experienced connection problem with cat 4006 + L3
module
> whereby the router intermittenly drop packet.
> >The L3 module seems to have the arp entry needed for it (show arp).
However
> from the L2 module when I do show cam dynamic, the entry for the mac
address
> is missing. I will comeback again sometime and then go missing again.....
This
> cause the intermitten
> >problem. I can temporary solve it by configuring static mac address but
of
> course this is not the ideal solutions.
> >Any of you have any idea ?
> >
> >Regards,
> >Donny
> >
> >
> >
> >
> >This message is for information purposes only and its content
> >should not be construed as an offer, or solicitation of an offer,
> >to buy or sell any banking or financial instruments or services
> >and no representation or warranty is given in respect of its
> >accuracy, completeness or fairness. The material is subject
> >to change without notice. You should take your own independent
> >tax, legal and other professional advice in respect of the content
> >of this message. This message may contain confidential or
> >legally privileged material and may not be copied, redistributed
> >or published (in whole or in part) without our prior written consent.
> >This email may have been intercepted, partially destroyed,
> >arrive late, incomplete or contain viruses and no liability is
> >accepted by any member of the Credit Agricole Indosuez group
> >as a result. If you are not the intended recipient of this message,
> >please immediately notify the sender and delete this message
> >from your computer.
> >
> >
> >_______________________________________________________________________
> >You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:03 GMT-3