From: Fred Ingham (fingham@cox.net)
Date: Mon Aug 18 2003 - 23:51:59 GMT-3
Did you test this? When I apply a netbios access-list to an ethernet
interface I get an error message that states netbios access-lists
are only applied to token-ring interfaces.
Cheers, Fred
----- Original Message -----
From: "Brown, Patrick (NSOC-OCF}" <PBrown4@chartercom.com>
To: "'Richard L. Pickard '" <nettable_walker@comcast.net>;
"'Ccielab@Groupstudy. Com '" <ccielab@groupstudy.com>
Sent: Sunday, August 17, 2003 6:24 PM
Subject: RE: NetBIOS name filter --- any ideas ?
> My answer would be:
>
> r3
>
> netbios access-list host NBT deny CCIE41*
> netbios access-list host NBT permit *
>
> int e0/0
> netbios output-access-filter host NBT
>
>
>
> Tx,
>
> Patrick B
> -----Original Message-----
> From: Richard L. Pickard
> To: Ccielab@Groupstudy. Com
> Sent: 8/17/2003 1:07 PM
> Subject: NetBIOS name filter --- any ideas ?
>
> Fiesta()
>
> I am working a lab that states the following:
> on R3 create a filter such that it will not send to R1 any NetBIOS names
> that begin with CCIE41 ,
>
> [GroupStudy removed an attachment of type image/jpeg which had a name of
> Fiesta Bkgrd.jpg]
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:02 GMT-3