From: yu chunyan (yuchunyan@hotmail.com)
Date: Mon Aug 18 2003 - 18:11:02 GMT-3
I donot test them. But I think first one can work. In the second one, the
line "route-map ei2ospf deny 10" should be "route-map ei2ospf permit 10".
Bin.
>From: wing_lam@jossynergy.com
>Reply-To: wing_lam@jossynergy.com
>To: ccielab@groupstudy.com
>Subject: redistribute from EIGRP to OSPF
>Date: Mon, 18 Aug 2003 19:06:35 +0800
>
>Hi group,
>
>Which one is better, for restricting routes redistribute from EIGRP into
>OSPF:
>
>1) Router ospf 77
> redistribute eigrp 88
> distribute 16 out eigrp 88
>
> access-list 16 deny 10.10.0.0 0.0.255.255
> access-list 16 permit any
>
>2) Router ospf 77
> redistribute eigrp 88 route-map ei2ospf
>
> route-map ei2ospf deny 10
> match ip address 16
> route-map ei2ospf permit 20
>
> access-list 16 deny 10.10.0.0 0.0.255.255
> access-list 16 permit any
>
>Thx,
>BBD (Big Black Dog)
>DISCLAIMER:- This email is confidential and intended only for the use of
>the individual or entity named above and may contain information that is
>privileged. If you are not the intended recipient, you are notified that
>any dissemination, distribution or copying of this email is strictly
>prohibited. If you have received this email in error, please notify us
>immediately by return email or telephone and destroy the original message.
>Thank you.
>
>
>_______________________________________________________________________
>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:01 GMT-3