From: Alec (clapun@graduate.hku.hk)
Date: Mon Aug 18 2003 - 13:17:17 GMT-3
it should not work...
Summary-address commands only apply to external routes, i.e. E1 & E2.
You can also verify by using show ip ospf database command.
----- Original Message -----
From: <wing_lam@jossynergy.com>
To: <ccielab@groupstudy.com>
Sent: Monday, August 18, 2003 11:46 PM
Subject: OSPF to RIP
> Hi group,
>
> I am evaluating one of the OSPF "summary-address" function, I use in
> "reverse" direction:
>
> Scenario as following:
>
> E1--R1--Ser0/0.2
>
> R1 loo 12: 10.100.100.12/25
> R1 E1: 10.100.1.1/24
> R1 Ser0/0.2: 10.1.2.5/24
>
>
> Router rip
> network 10.0.0.0
> Redistribute ospf 77 metric 2
>
> Router ospf 77
> summary-address 10.100.100.0 255.255.255.0
> network 10.1.2.5 0.0.0.0 area 0
> network 10.100.100.12 0.0.0.0 area 0
>
> I would like to make OSPF route 10.100.100.0/25 redist into RIP, as it's
in
> /25 subnet mask, I doing "summary-address 10.100.100.0 255.255.255.0" in
> order try to change the 10.100.100.0/25 to 10.100.100.0/24 while redist
> into RIP.
>
> Can this be achieved? I see some documents mentions this but I cannot
> implement it successfully.
>
> Thx,
> BBD (Big Black Dog)
> DISCLAIMER:- This email is confidential and intended only for the use of
> the individual or entity named above and may contain information that is
> privileged. If you are not the intended recipient, you are notified that
> any dissemination, distribution or copying of this email is strictly
> prohibited. If you have received this email in error, please notify us
> immediately by return email or telephone and destroy the original message.
> Thank you.
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:01 GMT-3