From: Roberto Adjakou (radjakou@cfao.sn)
Date: Mon Aug 18 2003 - 09:59:37 GMT-3
What is your ios version?
Try this:
int ser 0/0
encap fram
no fram inverse
no ip addr
int ser 0/0.1
ip address 10.10.1.1 255.255.0.0
frame-relay map ip 10.10.1.1 102
frame-relay map ip 10.10.1.2 102 [broadcast]
Cordialement/Best regards;
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
Roberto Adjakou
E-mail : RAdjakou@cfao.sn
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
-----Message d'origine-----
De : Rajagopal S [mailto:raj_ccie@yahoo.com]
Envoyi : dimanche 17 ao{t 2003 17:43
@ : ccielab@groupstudy.com
Objet : frame-relay map
Hi all,
I'm configuring a point to multipoint FR network. All necessary configurations on the FR switch has been done.
When I configure FR map command on the edge router, I get the following error:
R1(config)#int ser 0/0.1 multipoint
R1(config-subif)#frame-relay map ip 10.10.1.5 105
%PVC already assigned to interface Serial0/0
The configs on S0/0 is as follows :
interface Serial0/0.1 multipoint
ip address 10.10.1.1 255.255.0.0
frame-relay map ip 10.10.1.2 102
end
Any idea asto what the problem might be ?
Cheers
Raj
---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:00 GMT-3