From: 키노 (wwwjjang@chol.com)
Date: Mon Aug 18 2003 - 05:48:53 GMT-3
Hi..David..
Thanks for your kind reply..
I configure a neighbor command in R2, too..
then, The eigrp neighbor between R1 & R2 is established..
But, In your solution
Do R1 & R2 send & receive a unicast updates?
=>But i want to only send a unicast updates to R2..
So Ensure that EIGRP-Multicasts are not sent to the
R2...
=> Does your solution satisfy this query ??
R1>
router eigrp 100
network 1.1.1.0 0.0.0.255
network 2.2.2.0 0.0.0.255
neighbor 2.2.2.2 serial 0 **
R2>
router eigrp 100
network 3.3.3.0 0.0.0.255
network 2.2.2.0 0.0.0.255
neighbor 2.2.2.1 serial 0 **
--- Original Message ---
:83=@L(From): "David zhao" zhaobaolong@boco.com.cn
9^4B@L(To): "Darren Ward" dward@pla.net.au
:83=@O=C(Date): Mon, 18 Aug 2003 15:40:25 +0800
A&8q(Subject): Re: Re: Unicast update of EIGRP is possible??
config nei command on th r2 and you are ok
----- Original Message -----
From: "Darren Ward" <dward@pla.net.au>
To: <wwwjjang@chol.com>
Cc: <ccielab@groupstudy.com>
Sent: Monday, August 18, 2003 12:35 PM
Subject: Re: Re: Unicast update of EIGRP is possible??
> What IP addresses are you using on the serial interfaces?
>
> It looks like you've configured the same peer on each router rather than
> the IP address of the peer.
>
> Darren
>
> On Mon, 18 Aug 2003 wwwjjang@chol.com wrote:
>
> > Hi..John..
> > Thaks for your kind reply
> >
> > i change the configuration you suggested.
> > But it don't work well too !!
> >
> > How can i fix this problem ??? Help me !!!
> >
> > Here is my configuration & results..
> >
> >
> > R1>
> > router eigrp 100
> > network 1.1.1.0 0.0.0.255
> > network 2.2.2.0 0.0.0.255
> > neighbor 2.2.2.2 serial 0 **
> >
> > => 19:26:47: %DUAL-5-NBRCHANGE: IP-EIGRP 100 neighbor 2.2.2.2 (Serial0) is
> > down: Static peer configured
> >
> > R1#sh ip eigrp neighbors =>Neighbor is not established !!!
> > IP-EIGRP neighbors for process 100
> >
> > On R2,
> >
> > R2#
> > 13:56:41: %DUAL-5-NBRCHANGE: IP-EIGRP 100: Neighbor 2.2.2.2(Serial0) is
down: Remote peer static/dynamic
> >
> > R2#sh ip eigrp neighbors =>Neighbor is not established !!!
> > IP-EIGRP neighbors for process 100
> >
> >
> > _______________________________________________________________________
> > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:00 GMT-3