From: 키노 (wwwjjang@chol.com)
Date: Mon Aug 18 2003 - 03:08:02 GMT-3
Hi..Darren..
Thanks for your kind reply..
But I've configured the IP address of the peer!!!!
Here is My diagram & Config....
-------------
Test Diagram
--------------
(1.1.1.1-e0)-R1-(S0
2.2.2.1)---(S0 2.2.2.2)-R2-(e0 3.3.3.1)
----------------
My configuration
=> R1 want
to send a unicast updates to R2
so R1 don't send multicasts to R2
!!
----------------
R1>
router eigrp 100
network 1.1.1.0 0.0.0.255
network 2.2.2.0
0.0.0.255
neighbor 2.2.2.2 serial 0 **
R2>
router eigrp 100
network 3.3.3.0 0.0.0.255
network 2.2.2.0
0.0.0.255
--- Original Message ---
:83=@L(From): "Darren Ward" dward@pla.net.au
9^4B@L(To): wwwjjang@chol.com
:83=@O=C(Date): Mon, 18 Aug 2003 14:35:21 +1000 (EST)
A&8q(Subject): Re: Re: Unicast update of EIGRP is possible??
What IP addresses are you using on the serial interfaces?
It looks like you've configured the same peer on each router rather than
the IP address of the peer.
Darren
On Mon, 18 Aug 2003 wwwjjang@chol.com wrote:
> Hi..John..
> Thaks for your kind reply
>
> i change the configuration you suggested.
> But it don't work well too !!
>
> How can i fix this problem ??? Help me !!!
>
> Here is my configuration & results..
>
>
> R1>
> router eigrp 100
> network 1.1.1.0 0.0.0.255
> network 2.2.2.0 0.0.0.255
> neighbor 2.2.2.2 serial 0 **
>
> => 19:26:47: %DUAL-5-NBRCHANGE: IP-EIGRP 100 neighbor 2.2.2.2 (Serial0) is
> down: Static peer configured
>
> R1#sh ip eigrp neighbors =>Neighbor is not established !!!
> IP-EIGRP neighbors for process 100
>
> On R2,
>
> R2#
> 13:56:41: %DUAL-5-NBRCHANGE: IP-EIGRP 100: Neighbor 2.2.2.2(Serial0) is
down: Remote peer static/dynamic
>
> R2#sh ip eigrp neighbors =>Neighbor is not established !!!
> IP-EIGRP neighbors for process 100
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:00 GMT-3