From: wwwjjang@chol.com
Date: Sun Aug 17 2003 - 10:55:14 GMT-3
Hi, Group
i solved the Dlsw+ & RSVP's question.
Is my solution correct ??
=> When i configure DLSW's RSVP,
Do i have to configure Weighted Fair Queueing on the E0 & S0 -interfaces
of R1 & R3 ????
Thanks..
--------
Diagram
--------
|<---------------------OSPF-------------------------------->|
(1.1.1.1-e0)-R1-(s0 2.2.2.1)----(s0 2.2.2.2)-R3-(3.3.3.3 e0)
---------
Question
---------
-Configure that DLSW traffic between R1 & R3 has a 10K bandwidth reserved
& can burst to 15K.
-----------
My Solution
-----------
R1>
dlsw local-peer peer-id 2.2.2.1
dlsw remote-peer 0 tcp 2.2.2.2
dlsw bridge-group 1
bridge 1 protocol ieee
dlsw rsvp 10 15 **
!
interface Ethernet0
ip address 1.1.1.1 255.255.255.0
bridge-group 1
fair-queue **
!
interface serial 0
ip address 2.2.2.1 255.255.255.0
fair-queue **
R3>
dlsw local-peer peer-id 2.2.2.2
dlsw remote-peer 0 tcp 2.2.2.1
dlsw bridge-group 1
bridge 1 protocol ieee
dlsw rsvp 10 15 **
!
interface Ethernet0
ip address 3.3.3.3 255.255.255.0
fair-queue **
!
interface serial 0
ip address 2.2.2.2 255.255.255.0
fair-queue **
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:00 GMT-3