From: Thomas Dean (tj_dean@hotmail.com)
Date: Sun Aug 17 2003 - 10:02:44 GMT-3
Hi Matijevic
Nice solution.
But what would the solution be if the wanted networks were:
1.1.1.0/24
1.1.3.0/24
1.1.5.0/24.
Three lines or is it possible to get to less?
Thanks
Tom
Seong,
Here is a shorter way of accomplishing the same thing:
ip prefix-list frombbr seq 5 permit 1.1.1.0/24
ip prefix-list frombbr seq 10 permit 1.1.4.0/23 ge 24 le 24
Sincerely,
Matijevic
----- Original Message -----
From: "seonghui" <seonghui@vads.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, August 17, 2003 3:38 AM
Subject: prefix-list filtering
>Hi Group,
>
>I am doing a prefix-list filtering from a backbone router (BBR). The
routes
>send by BBR to router1 via eigrp is:
>
>1.1.1.0/24
>1.1.2.0/24
>1.1.3.0/24
>1.1.4.0/24
>1.1.5.0/24
>1.1.6.0/24
>
>only 1.1.1.0, 1.1.4.0 and 1.1.5.0 are allowed to be received by router1.
>below is what i have done on router 1:
>
>ip prefix-list frombbr seq 5 permit 1.1.1.0/24
>ip prefix-list frombbr seq 10 permit 1.1.4.0/24
>ip prefix-list frombbr seq 15 permit 1.1.5.0/24
>
>router eigrp 1
>distribute-list prefix frombbr in
>
>This works fine, but I am just wondering if there is a shorter way of
doing
>this, like do the task with only 1/2 prefix list. Or is there any simpler
>way to accomplish the task?
>
>Thanks and regards - SH
>
>
>_______________________________________________________________________
>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:00 GMT-3