From: Mustafa M Bayramov (spyroot@azeronline.com)
Date: Sun Aug 17 2003 - 07:48:43 GMT-3
/* The NAT Integration with MPLS VPNs feature allows multiple MPLS VPNs
to be configured on a single device to work together. NAT can
differentiate which MPLS VPN it receives IP traffic from even if the
MPLS VPNS are all using the same IP addressing scheme. This enhancement
enables multiple MPLS VPN customers to share services while ensuring
that each MPLS VPN is completely separate from the other. */
12.2(13)T This feature was introduced.
Check out docCD for 12.3 features. ( a lot new features for MPLS even
snmp trap for VRF : ) )
Regards
Mustafa M Bayramov
CISSP
CCNP,CCDP,Cisco Security Specialist
Network engineer and security analyst
Azercell Telecom J.V.
"I know nothing except the fact of my ignorance." Socrates
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Rajagopal S
Sent: Sunday, August 17, 2003 5:36 AM
To: Joerg Kohlenz; ccielab@groupstudy.com
Subject: Re: NAT per MPLS VRF
Hi Jeorg,
Why are you basically going for NAT in MPLS environment ?
for browsing traffic ? In case you need it for browsing, you can use
the vrf global routes to export the vrf information into your routing
table (if needed).
what is your exact requirement ?
Cheers
Raj
Joerg Kohlenz <j.kohlenz@itknetwork.com> wrote:
Hi,
does anyone ever tried to do NAT in an MPLS MultiVRF enviroment and
knows if it is possible to to NAT per VRF resp. VPN.
Maybe someone can help me or give me a hint ?
Thanks
Joerg
Mit freundlichen Gruessen,
Best regards,
Joerg Kohlenz
Cisco Certified Internet Expert CCIE #10163, CCSE
itknetwork Gesellschaft f|r Kommunikations- und Datentechnik mbH
Niederlassung M|nchen
Otto-Hahn-Stra_e 13b,
85521 Ottobrunn, Germany
Telefon: (0 89) 608 755-950
Telefax: (0 89) 600 87 6-88
Mail to: j.kohlenz@itknetwork.com
Internet: http://www.itknetwork.com
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:00 GMT-3