From: Alec (clapun@graduate.hku.hk)
Date: Sun Aug 17 2003 - 03:19:20 GMT-3
is it a typo ??
R1>
dlsw local-peer peer-id 2.2.2.1
dlsw remote-peer 0 tcp 2.2.2.2
dlsw bridge-group 1
bridge 1 protocol ieee
dlsw bridge 10 15 ** <== typo ?
should be "dlsw rsvp 10 15 " ??
----- Original Message -----
From: <wwwjjang@chol.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, August 17, 2003 2:11 PM
Subject: Dlsw+ & RSVP's Question.??
> Hi, Group
>
> i solved the Dlsw+ & RSVP's question.
> Is my solution correct ??
>
> => When i configure DLSW's RSVP,
> Do i have to configure Weighted Fair Queueing on the E0 & S0 -interfaces
> of R1 & R3 ????
>
> Thanks..
>
> --------
> Diagram
> --------
> |<---------------------OSPF-------------------------------->|
>
> (1.1.1.1-e0)-R1-(s0 2.2.2.1)----(s0 2.2.2.2)-R3-(3.3.3.3 e0)
>
> ---------
> Question
> ---------
> -Configure that DLSW traffic between R1 & R3 has a 10K bandwidth reserved
> & can burst to 15K.
>
> -----------
> My Solution
> -----------
>
> R1>
>
> dlsw local-peer peer-id 2.2.2.1
> dlsw remote-peer 0 tcp 2.2.2.2
> dlsw bridge-group 1
> bridge 1 protocol ieee
> dlsw bridge 10 15 **
> !
> interface Ethernet0
> ip address 1.1.1.1 255.255.255.0
> bridge-group 1
> fair-queue **
> !
> interface serial 0
> ip address 2.2.2.1 255.255.255.0
> fair-queue **
>
> R3>
>
> dlsw local-peer peer-id 2.2.2.2
> dlsw remote-peer 0 tcp 2.2.2.1
> dlsw bridge-group 1
> bridge 1 protocol ieee
> dlsw bridge 10 15 **
> !
> interface Ethernet0
> ip address 3.3.3.3 255.255.255.0
> fair-queue **
> !
> interface serial 0
> ip address 2.2.2.2 255.255.255.0
> fair-queue **
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:00 GMT-3