From: Brown, Patrick (NSOC-OCF} (PBrown4@chartercom.com)
Date: Sat Aug 16 2003 - 23:20:02 GMT-3
Try this:
rmon event 1 log trap cisco description "High 5min CPU utilization" owner
joeblow
rmon alarm 1 lsystem.58.0 20 absolute rising-threshold 65 1
falling-threshold 45 1 owner joeblow
Should trigger an alarm when your box is at 65% for 5 min.
Don't forget SNMP config!
GWtoheaven#sh snmp mib | in lsystem
lsystem.1
lsystem.2
lsystem.3
lsystem.4
lsystem.5
lsystem.6
lsystem.8
lsystem.9
lsystem.10
lsystem.11
lsystem.12
lsystem.13
lsystem.14
lsystem.15
lsystem.16
lsystem.17
lsystem.18
lsystem.19
lsystem.20
lsystem.21
lsystem.22
lsystem.23
lsystem.24
lsystem.25
lsystem.26
lsystem.27
lsystem.28
lsystem.29
lsystem.30
lsystem.31
lsystem.32
lsystem.33
lsystem.34
lsystem.35
lsystem.36
lsystem.37
lsystem.38
lsystem.39
lsystem.40
lsystem.41
lsystem.42
lsystem.43
lsystem.44
lsystem.45
lsystem.46
lsystem.47
lsystem.48
lsystem.49
lsystem.50
lsystem.51
lsystem.52
lsystem.53
lsystem.54
lsystem.55
lsystem.56
lsystem.57
lsystem.58
lsystem.59
lsystem.60
lsystem.61
lsystem.62
lsystem.63
lsystem.64
lsystem.65
lsystem.66
lsystem.67
lsystem.68
lsystem.69
lsystem.70
lsystem.71
lsystem.72
lsystem.73
lsystem.74
lsystem.75
lsystem.76
HTH,
Patrick B
-----Original Message-----
From: MMoniz
To: Peng Zheng; ccielab@groupstudy.com
Sent: 8/16/2003 3:12 PM
Subject: RE: CPU utilization SNMP Traps
I think you can set an alarm and an event to do this. Except I haven't
been
able to find code that
recognizes the alarms for CPU.
The alarms should be cpmCPUTotal1min or cpmCPUTotal5min
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a
0080
094a94.shtml
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a
0080
094478.shtml
I always get "MIB object unknown" Even on 12.3 code.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Peng Zheng
Sent: Saturday, August 16, 2003 2:46 PM
To: ccielab@groupstudy.com
Subject: CPU utilization SNMP Traps
Router need to send traps to a host when CPU
utilization is higher or lower than a value.
I can not find related configs in SNMP. Does anyone
know how to configure this?
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:00 GMT-3