From: John Matijevic (matijevi@bellsouth.net)
Date: Fri Aug 15 2003 - 23:24:27 GMT-3
Hello Richard,
I believe you are missing the ip ospf network command under the serial
interfaces.
Sincerely,
Matijevic
----- Original Message -----
From: "Richard L. Pickard" <nettable_walker@comcast.net>
To: "Ccielab@Groupstudy. Com" <ccielab@groupstudy.com>
Sent: Friday, August 15, 2003 11:07 PM
Subject: OSPF over frame relay --- what am I missing here ? Please help
> FiestaR_1 & R_3 are directly connected via frame relay s0/0 - s0/0
>
> I cannot get ospf to come up between them & do not understand why.
>
> Thanks for any help -
>
> R_1#
> R_1#
> R_1#sh ip ospf neighbor
>
> Neighbor ID Pri State Dead Time Address
Interface
> N/A 0 ATTEMPT/DROTHER - 130.4.100.3
> Serial0/0.1
> R_1#sh run
> Building configuration...
>
> Current configuration : 2600 bytes
> !
> ! Last configuration change at 21:58:05 UTC Fri Aug 15 2003
> ! NVRAM config last updated at 21:58:06 UTC Fri Aug 15 2003
> !
> version 12.2
> service timestamps debug datetime msec
> hostname R_1
> !
> enable password cisco
> !
> !
> !
> interface Loopback0
> ip address 130.4.1.1 255.255.255.0
> !
> interface Ethernet0/0
> ip address 130.4.135.1 255.255.255.0
> full-duplex
> !
> interface Serial0/0
> no ip address
> encapsulation frame-relay
> no arp frame-relay
> no frame-relay inverse-arp
> !
> interface Serial0/0.1 multipoint
> ip address 130.4.100.1 255.255.255.0
> ip pim sparse-dense-mode
> ip ospf priority 0
> no arp frame-relay
> frame-relay map ip 130.4.100.2 103 broadcast
> frame-relay map ip 130.4.100.3 103 broadcast
> frame-relay map ip 130.4.100.6 103 broadcast
> no frame-relay inverse-arp
> !
> !
> router ospf 10
> router-id 130.4.1.1
> log-adjacency-changes detail
> network 130.4.1.0 0.0.0.255 area 0
> network 130.4.13.0 0.0.0.255 area 1
> network 130.4.100.0 0.0.0.255 area 0
> network 130.4.135.0 0.0.0.255 area 0
>
> router bgp 65060
> no synchronization
> bgp log-neighbor-changes
> bgp confederation identifier 401
> bgp confederation peers 65050
> network 190.4.1.0 mask 255.255.255.0
> neighbor 130.4.100.3 remote-as 65050
> neighbor 130.4.135.35 remote-as 65060
> no auto-summary
> !
> ip classless
> ip http server
> ip ospf name-lookup
>
>
============================================================================
> =====================
>
>
>
> R_3#
> R_3#sh ip ospf neighbor
>
> Neighbor ID Pri State Dead Time Address
Interface
> N/A 0 ATTEMPT/DROTHER - 130.4.100.1
> Serial0/0.13
> 130.4.34.4 0 FULL/ - - 130.4.34.4 OSPF_VL1
> 130.4.34.6 1 FULL/BDR 00:00:38 130.4.36.6
> FastEthernet0/
> 0.2
> 130.4.34.4 1 FULL/BDR 00:00:31 130.4.34.4
> FastEthernet0/
> 0.1
> R_3#sh run
> Building configuration...
>
> Current configuration : 4011 bytes
> !
> ! Last configuration change at 20:51:34 UTC Fri Aug 15 2003
> ! NVRAM config last updated at 20:51:35 UTC Fri Aug 15 2003
> !
> version 12.3
> service timestamps debug datetime msec
> hostname R_3
> !
> logging buffered 4096 debugging
> enable password cisco
>
> interface Loopback0
> ip address 130.4.3.3 255.255.255.0
> ip ospf network point-to-point
> !
> interface Loopback1
> ip address 190.4.3.1 255.255.255.0
> !
> interface FastEthernet0/0
> no ip address
> speed 100
> full-duplex
> !
> interface FastEthernet0/0.1
> encapsulation dot1Q 4
> ip address 130.4.34.3 255.255.255.0
> no ip redirects
> ip pim sparse-dense-mode
> !
> interface FastEthernet0/0.2
> encapsulation dot1Q 6
> ip address 130.4.36.3 255.255.255.0
> no ip redirects
> ip pim sparse-dense-mode
> !
> interface Serial0/0
> no ip address
> ip pim sparse-dense-mode
> encapsulation frame-relay
> no arp frame-relay
> no frame-relay inverse-arp
> !
> interface Serial0/0.13 multipoint
> ip address 130.4.100.3 255.255.255.240
> ip hello-interval eigrp 144 5
> ip hold-time eigrp 144 15
> ip authentication mode eigrp 144 md5
> ip authentication key-chain eigrp 144 ccie
> ip pim sparse-dense-mode
> no arp frame-relay
> frame-relay map ip 130.4.100.1 301 broadcast
> frame-relay map ip 130.4.100.2 302 broadcast
> frame-relay map ip 130.4.100.6 306 broadcast
> no frame-relay inverse-arp
> !
> !
> router eigrp 144
> network 130.4.100.0 0.0.0.255
> no auto-summary
>
> router ospf 10
> router-id 130.4.3.3
> log-adjacency-changes detail
> area 3 virtual-link 130.4.34.4
> redistribute rip metric 35 subnets
> network 130.4.3.0 0.0.0.255 area 0
> network 130.4.13.0 0.0.0.255 area 1
> network 130.4.34.0 0.0.0.255 area 3
> network 130.4.36.0 0.0.0.255 area 2
> network 130.4.100.0 0.0.0.255 area 0
> neighbor 130.4.100.1
>
> router rip
> version 2
> redistribute ospf 10 metric 2
> network 130.4.0.0
> no auto-summary
>
> router bgp 65050
> no synchronization
> bgp log-neighbor-changes
> bgp confederation identifier 401
> bgp confederation peers 65060
> network 190.4.3.0 mask 255.255.255.0
> neighbor 130.4.34.4 remote-as 402
> neighbor 130.4.100.1 remote-as 65060
> neighbor 130.4.100.2 remote-as 65050
> neighbor 130.4.100.6 remote-as 65050
> no auto-summary
>
> ip http server
> ip http secure-server
> ip classless
> !
> ip ospf name-lookup
>
> !
>
> [GroupStudy removed an attachment of type image/jpeg which had a name of
Fiesta Bkgrd.jpg]
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:59 GMT-3