From: Dennis Laganiere (dennisl@advancedbionics.com)
Date: Thu Aug 14 2003 - 13:17:42 GMT-3
I simply setup my netgear to forward telnet traffic from outside to the IP
address of my terminal server (2511), and that worked great.
Good luck...
--- Dennis
-----Original Message-----
From: Jason Westlund [mailto:jason.westlund@nmwco.com]
Sent: Thursday, August 14, 2003 9:11 AM
To: John Matijevic; ccielab@groupstudy.com
Subject: RE: putting rack on internet
John,
Do you have NAT device to use? I have configured a NetGear WebSafer
router to allow PCAnywhere traffic to a specific server. From there I
can access my entire network and lab gear through the comm Server.
I hope this helps.
-Jason
-----Original Message-----
From: John Matijevic [mailto:matijevi@bellsouth.net]
Sent: Thursday, August 14, 2003 8:19 AM
To: ccielab@groupstudy.com
Subject: putting rack on internet
Hello Team,
I am trying to setup my routers so I can access remotely via internet. I
have
a Wirespeed- Westell dsl router at home, where I have a static ip
address
assigned to it. I cannot get anymore static ip addresses as I have a
residential plan from BellSouth. I am not sure how to get this working I
have
attempted to try to use passthru to pass the IP to my comm server. If
anyone
could help me get this working, would be greatly appreciated.
Sincerely,
Matijevic
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:59 GMT-3