From: John Matijevic (matijevi@bellsouth.net)
Date: Thu Aug 14 2003 - 10:06:38 GMT-3
Hello wwwjjang,
I dont believe either of your answer's is correct.
Router(config)# snmp-server chassis-id number Sets the system serial
number.
Hostname will just change the name of the router, that is not dealing with
snmp commands.
I think this is what your looking for and can be found on the snmp section
of the DocCd.
Specifying an SNMP-Server Engine Name (ID)
To specify an identification name (ID) for a local SNMP engine, use the
following command in global configuration mode:
Command Purpose
Router(config)# snmp-server engineID local engineid-string Specifies
the name of the local SNMP engine (or copy of SNMP).
Sincerely,
Matijevic
----- Original Message -----
From: <wwwjjang@chol.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, August 14, 2003 3:11 AM
Subject: Cat 3550's SNMP question!!
> Hi..everyone..
>
> this is a cat3550's question..what's the correct answer ?
>
> ---------
> Question
> ---------
> -Set the cat3550's system name to CAT,Location to JP, and contact to HERE
>
> ---------
> My answer
> ---------
> snmp-server chassis-id CAT => it's right??
> => or "hostname CAT" is right ??
> snmp-server location JP
> snmp-server contact HERE
>
>
> Who knows the correct answer, help me!!
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:59 GMT-3