From: Dave Swink \(dswink\) (dswink@cisco.com)
Date: Tue Aug 12 2003 - 19:48:34 GMT-3
Dialer load-threshold is based on the load in one channel (64K), so
"dialer load-threshold 128" would bring the other channel up at 32K.
Dave Swink
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Rajagopal S
Sent: Tuesday, August 12, 2003 12:42 PM
To: Scott Morris; wwwjjang@chol.com; ccielab@groupstudy.com
Subject: RE: what's the ppp multilink threshold's value ??
Oops... you are right Scott.. Waz a bit confused when replying this
mail.
Its the interface load that is specified (x/255) in this command.
Thanks..
Cheers
Raj
Scott Morris <swm@emanon.com> wrote:
Do be aware that these values are NOT percentages, they are /255 values
(reflected in the load of show interface)
50 would be an inaccurate number.
127 would be half of 0-255. (or 128 depending on whether your glass is
half-full or half-empty)
As for the argument of 2 or 3, technically 2.55 would round up to 3, but
I really don't believe someone would be THAT picky. Just my humble
opinion.
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Rajagopal S
Sent: Tuesday, August 12, 2003 1:01 PM
To: wwwjjang@chol.com; ccielab@groupstudy.com
Subject: Re: what's the ppp multilink threshold's value ??
Hi Jang,
128 K is the total bandwidth of the ISDN line. 50% of it will be 64 K.
So for 64K(max), the dialer load threshold will be,
dialer load-threshold 50 (inbound|outbound|either).
This will trigger the second channel only after the first channel gets
64 k (50%) of traffic.
Similarly,use,
dialer load-threshold 1 either , for triggering the call after 1 % of
the traffic on the first link.
Cheers
Raj
wwwjjang@chol.com wrote:
Hi..every one.
When i config a ppp multilink on bri interface,
I want to make sure that the second channel will bring up
when the first-channel has a 1% traffic.
=> 1% of 255 = 2.55
Waht's The load-threshold value for multilink ppp between 2 and 3 ??
int bri 0
ppp multilink
dialer load-threshold ??? either=> this direction is right ??
Thanks..
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:58 GMT-3