From: Peng Zheng (zpnist@yahoo.com)
Date: Tue Aug 12 2003 - 16:59:18 GMT-3
According to my understanding, I should configure this
if I use backup inter under the frame relay interface.
Is that correct?
Thanks for help.
--- MADMAN <dave@interprise.com> wrote:
>
> Learn something everyday! In our frame network
> our switches local
> management must have always been end to end. In my
> experience it has
> always worked without this new feature.
>
> Out of curiousity, is this not the case
> elsewhere?
>
> Dave
>
> ying c wrote:
> > Maybe he's referring to the following?
> >
> >
>
http://www.cisco.com/en/US/products/sw/iosswrel/ps1830/products_feature_guide09186a0080087a58.html#wp5038
> >
> > (Pls watch the wrap)
> > --- MADMAN <dave@interprise.com> wrote:
> >
> >> What do you mean? Frame relay uses LMI but
> that
> >>is only between the
> >>CPE and the frame switch. There is no OAM
> >>equivilant in frame but ever
> >>since about 11.0 a Cisco router p-p subinterface
> >>will indicate a down
> >>state if the remote side of the PVC fails, no
> >>additional config required.
> >>
> >> Dave
> >>
> >>Peng Zheng wrote:
> >>
> >>>When should I configure this?
> >>>
> >>>Could anyone give some examples?
> >>>
> >>>
> >>>__________________________________
> >>>Do you Yahoo!?
> >>>Yahoo! SiteBuilder - Free, easy-to-use web site
> >>
> >>design software
> >>
> >>>http://sitebuilder.yahoo.com
> >>>
> >>>
> >>>
> >>
> >
>
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:57 GMT-3