From: Micah Byers (micah@myvine.com)
Date: Tue Aug 12 2003 - 16:40:28 GMT-3
You should only configure the local peer IP address in promiscuous mode
for the local peer. This will cause that peer to accept all request
from remote DLSW Peers.
Micah J. Byers- CCIE #12079
Senior Network Engineer
Hypervine
mbyers@hypervine.net
P: 574-247-7015
F: 574-247-4255
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Rajagopal S
Sent: Tuesday, August 12, 2003 1:31 PM
To: ccielab@groupstudy.com
Subject: DLSW - Promscious mode
HI All,
I have read through DLSW recently and seen the keyword "promscious" in
the dlsw local-peer command.
What many docs say that is, any remote peer's request is accepted by
this client.
I have also seen docs which specify the remote peer's IP addresses, when
configuring the local peer in "Promscious" mode.
Is it necessary to configure remote peer IP addresses in this mode or is
this automatically detected ?
Cheers
Raj
---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:57 GMT-3