From: Andrew Bratchell (a.bratchell@caeuk.com)
Date: Tue Aug 12 2003 - 13:23:53 GMT-3
I think this doc will help you.
http://www.cisco.com/en/US/tech/tk543/tk544/technologies_tech_note09186a
0080094612.shtml
Thanks
Andy
-----Original Message-----
From: wing_lam@jossynergy.com [mailto:wing_lam@jossynergy.com]
Sent: 12 August 2003 16:31
To: ccielab@groupstudy.com
Subject: MAX reserved BW
Hi group,
A question on CBWFQ:
By default, 75% of bandwidth can be reserved.
Remaining 25% is used for L2 overhead, routing protocol etc.
If class A traffic use bandwidth percent 50, class B traffic use
bandwidth
percent 40 and if I configure the max-reserved-bandwidth to 100%, will
the
above overhead group into the default queue (i.e. remaining 10%)? Or no
bandwidth will allowable for these critical traffic?
Thx,
BBD (Big Black Dog)
DISCLAIMER:- This email is confidential and intended only for the use
of
the individual or entity named above and may contain information that is
privileged. If you are not the intended recipient, you are notified that
any dissemination, distribution or copying of this email is strictly
prohibited. If you have received this email in error, please notify us
immediately by return email or telephone and destroy the original
message.
Thank you.
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:57 GMT-3