From: John Matijevic (matijevi@bellsouth.net)
Date: Fri Aug 08 2003 - 10:22:57 GMT-3
Hello wwwjjang,
The config looks good, but you need to have just input on the interface.
Sincerely,
Matijevic
----- Original Message -----
From: <wwwjjang@chol.com>
To: <ccielab@groupstudy.com>
Sent: Friday, August 08, 2003 5:25 AM
Subject: Policy-map Question in Cat3550 !!!
> Hi..everyone..
>
> i want to policy-route map in cat3550
> my answer is right??
> ---------
> Question
> ---------
> i want to policy port 0/1 of Cat3550. So limit the speed on this port to
2Mbps
> ,with the burst set to 64Kbps.If the traffic exceed the policy,Drop all
packets
>
> ----------
> My answer
> ----------
> mls qos
> !
> interface fastethernet0/1
> service-policy input POL **
> service-policy output POL **
> => Do i have to config in & out service-policy at this port??
> !
> policy-map POL
> class class1
> police 2000000 64000 exceed-action drop
> !
> class-map class1
> match access-group 100
> !
> access-list permit 100 ip any any **> is this right?
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:55 GMT-3