From: Santos, Andre (Andre.Santos@usi.net)
Date: Fri Aug 08 2003 - 10:16:39 GMT-3
You only have one dial-string. You need 2
-----Original Message-----
From: Alec Pun [mailto:clapun@graduate.hku.hk]
Sent: Friday, August 08, 2003 9:12 AM
To: Daniel Sheedy; ccielab@groupstudy.com
Subject: Re: PPP Multilink problem
Hi Daniel,
I've already tried load-threshold 1 i nR6 but still can't suceed.
regards,
alec
----- Original Message -----
From: "Daniel Sheedy" <dansheedy@gmx.net>
To: <ccielab@groupstudy.com>
Sent: Friday, August 08, 2003 8:34 PM
Subject: Re: PPP Multilink problem
> Hi Alex,
>
> Have you tried lowering the value on the dialer load-threshold? Make
it 1
> or 2 and see what happens.
>
> Dan
>
>
> ----- Original Message -----
> From: "Alec Pun" <clapun@graduate.hku.hk>
> To: <ccielab@groupstudy.com>
> Sent: Friday, August 08, 2003 2:01 PM
> Subject: PPP Multilink problem
>
>
> > Hi group,
> >
> > Another help is very much appreciated. I have conifgured R5 & R6
ppp
> > multilink over BRI. However, I can not kick up BRI0:2 by multilink
PPP
by
> > continous ping. I've tried to remove dialer load-threhold in either
one
> > router but still can't make it work. Kindly advise any hints.
> >
> > regards,
> > alec
> >
> > R5#show run
> > Building configuration...
> >
> > Current configuration : 869 bytes
> > !
> > version 12.1
> > service timestamps debug uptime
> > service timestamps log uptime
> > no service password-encryption
> > !
> > hostname R5
> > !
> > !
> > username R6 password 0 cisco
> > !
> > !
> > !
> > !
> > ip subnet-zero
> > !
> > isdn switch-type basic-net3
> > !
> > !
> > !
> > !
> > !
> > interface Ethernet0
> > no ip address
> > shutdown
> > !
> > interface Serial0
> > no ip address
> > shutdown
> > no fair-queue
> > !
> > interface Serial1
> > no ip address
> > shutdown
> > !
> > interface BRI0
> > ip address 1.1.1.5 255.255.255.0
> > encapsulation ppp
> > dialer string 4930622
> > dialer load-threshold 20 either
> > dialer-group 1
> > isdn switch-type basic-net3
> > isdn spid1 81049306240101
> > isdn spid2 81049306250101
> > ppp authentication pap
> > ppp pap sent-username R5 password 7 02050D4808095E
> > ppp multilink
> > !
> > ip classless
> > ip http server
> > !
> > dialer-list 1 protocol ip permit
> > !
> > !
> > line con 0
> > exec-timeout 0 0
> > privilege level 15
> > logging synchronous
> > line aux 0
> > line vty 0 4
> > login
> > !
> > end
> >
> >
> > R6#show run
> > Building configuration...
> >
> > Current configuration : 1601 bytes
> > !
> > version 12.1
> > service timestamps debug uptime
> > service timestamps log uptime
> > no service password-encryption
> > !
> > hostname R6
> > !
> > !
> > username FAKENAME password 0 cisco
> > username R5 password 0 cisco1
> > !
> > !
> > !
> > !
> > ip subnet-zero
> > no ip domain-lookup
> > !
> > isdn switch-type basic-net3
> > !
> > interface Ethernet0
> > no ip address
> > shutdown
> > !
> > interface Serial0
> > no ip address
> > shutdown
> > no fair-queue
> > !
> > interface Serial1
> > no ip address
> > shutdown
> > !
> > interface BRI0
> > ip address 1.1.1.6 255.255.255.0
> > encapsulation ppp
> > dialer enable-timeout 5
> > dialer string 4930624
> > dialer load-threshold 1 either
> > dialer-group 1
> > isdn switch-type basic-net3
> > isdn spid1 81049306220101
> > isdn spid2 81049306230101
> > ppp authentication pap
> > ppp pap sent-username R6 password 7 02050D480809
> > ppp multilink
> > !
> > ip classless
> > ip http server
> > !
> > dialer-list 1 protocol ip permit
> > !
> > !
> > line con 0
> > exec-timeout 0 0
> > privilege level 15
> > logging synchronous
> > line aux 0
> > line vty 0 4
> > login
> > !
> > end
> >
> >
> >
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:55 GMT-3