From: Micah Byers (micah@myvine.com)
Date: Thu Aug 07 2003 - 18:57:24 GMT-3
Take a look at the following link. There is a good example on there that
shows how rmon events and alarms work. You would simply need to change the
MIB used.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/ffun_c/fcfprt3/fcf016.htm
-Micah-
----- Original Message -----
From: <wing_lam@jossynergy.com>
To: <ccielab@groupstudy.com>
Sent: Monday, August 04, 2003 10:09 AM
Subject: Sample config for RMON
> Hi group,
>
> Can anybody give me a sample config on how can I trigger the RMON event
> when the Serial line traffic is greater than 700k bit/s?
>
> Thx,
> BBD (Big Black Dog)
> DISCLAIMER:- This email is confidential and intended only for the use of
> the individual or entity named above and may contain information that is
> privileged. If you are not the intended recipient, you are notified that
> any dissemination, distribution or copying of this email is strictly
> prohibited. If you have received this email in error, please notify us
> immediately by return email or telephone and destroy the original message.
> Thank you.
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:55 GMT-3