Connecting IP Phone 7960 to CAt3550

From: Tomasz Szymanski (tomasz.szymanski@trecom.pl)
Date: Thu Aug 07 2003 - 07:09:37 GMT-3

• Next message: Quetta Walla: "fiber switch"
• Previous message: wing_lam@jossynergy.com: "Dlsw question"
• Next in thread: Jung, Jin: "RE: Connecting IP Phone 7960 to CAt3550"
• Maybe reply: Jung, Jin: "RE: Connecting IP Phone 7960 to CAt3550"
• Maybe reply: Marcus Jensen: "RE: Connecting IP Phone 7960 to CAt3550"
• Maybe reply: Mustafa M Bayramov: "RE: Connecting IP Phone 7960 to CAt3550"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi group,

Studying IPexperts lab 36 I found two solutions for connecting Cisco IP
Phone to cat. Can you explain me the differences and when the
configurations should be used?

Version 1:

interface FastEthernet0/11
 switchport access vlan 102
 switchport voice vlan 101
 switchport trunk encapsulation dot1q
 switchport priority extend cos 0
 no ip address
 mls qos cos 1
 mls qos cos override
 spanning-tree portfast

Version2

interface FastEthernet0/12
 switchport trunk encapsulation dot1q
 switchport trunk native vlan 202
 switchport mode trunk
 switchport voice vlan 201
 no ip address
 spanning-tree portfast

• Next message: Quetta Walla: "fiber switch"
• Previous message: wing_lam@jossynergy.com: "Dlsw question"
• Next in thread: Jung, Jin: "RE: Connecting IP Phone 7960 to CAt3550"
• Maybe reply: Jung, Jin: "RE: Connecting IP Phone 7960 to CAt3550"
• Maybe reply: Marcus Jensen: "RE: Connecting IP Phone 7960 to CAt3550"
• Maybe reply: Mustafa M Bayramov: "RE: Connecting IP Phone 7960 to CAt3550"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:54 GMT-3