From: John Matijevic (matijevi@bellsouth.net)
Date: Tue Aug 05 2003 - 20:27:18 GMT-3
Thanks Guys,
It looks like you have to do the sequence 3 times, where as ping you have to
do twice.
Sincerely,
Matijevic
----- Original Message -----
From: "Biondino, Joseph" <joseph.biondino@au.unisys.com>
To: "John Matijevic" <matijevi@bellsouth.net>; "Scott Morris"
<swm@emanon.com>; "yu chunyan" <yuchunyan@hotmail.com>; <bgv@ggv.com.cn>;
<gitsyoung@yahoo.co.jp>; <ccielab@groupstudy.com>
Sent: Tuesday, August 05, 2003 7:22 PM
Subject: RE: could ping but couldn't traceroute
> Well it works fine for me on 12.2 code and below, I have to press it
> numerous times however.
>
> bbg-tafe-br1#trace 1.1.1.1
>
> Type escape sequence to abort.
> Tracing the route to 1.1.1.1
>
> 1 192.168.219.54 36 msec 40 msec 40 msec
> 2 * * *
> 3 * *
> bbg-tafe-br1#sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) 3600 Software (C3620-DS-M), Version 12.2(16a), RELEASE SOFTWARE
> (fc2)
> Copyright (c) 1986-2003 by cisco Systems, Inc.
> Compiled Fri 18-Apr-03 14:44 by pwade
> Image text-base: 0x60008930, data-base: 0x61246000
>
> ROM: System Bootstrap, Version 11.1(7)AX [kuong (7)AX], EARLY DEPLOYMENT
> RELEASE SOFTWARE (fc2)
>
> bbg-tafe-br1 uptime is 2 weeks, 6 days, 15 hours, 34 minutes
> System returned to ROM by power-on
> System restarted at 17:47:59 AEST Wed Jul 16 2003
> System image file is "slot0:c3620-ds-mz.122-16a.bin"
>
> cisco 3620 (R4700) processor (revision 0x81) with 61440K/4096K bytes of
> memory.
> Processor board ID 06965787
> R4700 CPU at 80Mhz, Implementation 33, Rev 1.0
> Bridging software.
> X.25 software, Version 3.0.0.
> SuperLAT software (copyright 1990 by Meridian Technology Corp).
> Basic Rate ISDN software, Version 1.1.
> 2 Ethernet/IEEE 802.3 interface(s)
> 1 Serial network interface(s)
> 1 ISDN Basic Rate interface(s)
> DRAM configuration is 32 bits wide with parity disabled.
> 29K bytes of non-volatile configuration memory.
> 8192K bytes of processor board System flash (Read/Write)
> 16384K bytes of processor board PCMCIA Slot0 flash (Read/Write)
>
> Configuration register is 0x2102
>
> Kind regards,
>
> Joseph Biondino
> Network Specialist
> UNISYS
> Network Command Centre
>
> 115 - 117 Wicks Rd
> North Ryde NSW 2113
> Phone: 02 9857 3149
> Group: 02 9390 1107
> Fax: 02 9857 3122
>
> -----Original Message-----
> From: John Matijevic [mailto:matijevi@bellsouth.net]
> Sent: Wednesday, 6 August 2003 9:19 AM
> To: Scott Morris; yu chunyan; bgv@ggv.com.cn; Biondino, Joseph;
> gitsyoung@yahoo.co.jp; ccielab@groupstudy.com
> Subject: Re: could ping but couldn't traceroute
>
> Hello Team,
> That will work for ping, however, it doesnt work on my ios 12.1 for Trace.
> Sincerely,
> Matijevic
> ----- Original Message -----
> From: "Scott Morris" <swm@emanon.com>
> To: "'yu chunyan'" <yuchunyan@hotmail.com>; <bgv@ggv.com.cn>;
> <joseph.biondino@au.unisys.com>; <gitsyoung@yahoo.co.jp>;
> <ccielab@groupstudy.com>
> Sent: Tuesday, August 05, 2003 7:01 PM
> Subject: RE: could ping but couldn't traceroute
>
>
> > Ctrl-Shift-6 perhaps a few times.
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > yu chunyan
> > Sent: Tuesday, August 05, 2003 6:55 PM
> > To: bgv@ggv.com.cn; joseph.biondino@au.unisys.com; swm@emanon.com;
> > gitsyoung@yahoo.co.jp; ccielab@groupstudy.com
> > Subject: Re: could ping but couldn't traceroute
> >
> >
> > Hi,
> >
> > I have a trivia question for traceroute: how to stop it before it
> > finishes.
> > thank you in advance.
> >
> > Bin.
> >
> >
> >
> > >From: "huang gang" <bgv@ggv.com.cn>
> > >Reply-To: "huang gang" <bgv@ggv.com.cn>
> > >To: "Biondino, Joseph" <joseph.biondino@au.unisys.com>, "Scott
> > Morris"
> > ><swm@emanon.com>, "Tom Young" <gitsyoung@yahoo.co.jp>,
> > ><ccielab@groupstudy.com>
> > >Subject: Re: could ping but couldn't traceroute
> > >Date: Tue, 5 Aug 2003 14:44:43 +0800
> > >
> > >Scott and Biondino:
> > > you are right! i am sorry for my mistake.but i think there are
> > >different method to achiving TRACEROUTE.maybe ICMP is another way?
> > >thanks!
> > >huangg
> > >----- Original Message -----
> > >From: "Biondino, Joseph" <joseph.biondino@au.unisys.com>
> > >To: "huang gang" <bgv@ggv.com.cn>; "Scott Morris" <swm@emanon.com>;
> > "Tom
> > >Young" <gitsyoung@yahoo.co.jp>; <ccielab@groupstudy.com>
> > >Sent: Tuesday, August 05, 2003 1:37 PM
> > >Subject: RE: could ping but couldn't traceroute
> > >
> > >
> > > > Huang,
> > > >
> > > > I agree with Scott, it does use UDP. Take this as evidence:
> > > >
> > > > bbg-tafe-br1#trace
> > > > Protocol [ip]:
> > > > Target IP address: 1.1.1.1
> > > > Source address: 10.19.67.254
> > > > Numeric display [n]:
> > > > Timeout in seconds [3]:
> > > > Probe count [3]:
> > > > Minimum Time to Live [1]:
> > > > Maximum Time to Live [30]:
> > > > Port Number [33434]:
> > > > Loose, Strict, Record, Timestamp, Verbose[none]:
> > > > Type escape sequence to abort.
> > > > Tracing the route to 1.1.1.1
> > > >
> > > > 1 192.168.219.54 60 msec 40 msec 36 msec
> > > > 2 * *
> > > >
> > > > http://www.cisco.com/warp/public/63/ping_traceroute.html#traceroute
> > > >
> > > >
> > > > Kind regards,
> > > >
> > > > Joseph Biondino
> > > > Network Specialist
> > > > UNISYS
> > > > Network Command Centre
> > > >
> > > > 115 - 117 Wicks Rd
> > > > North Ryde NSW 2113
> > > > Phone: 02 9857 3149
> > > > Group: 02 9390 1107
> > > > Fax: 02 9857 3122
> > > >
> > > > -----Original Message-----
> > > > From: huang gang [mailto:bgv@ggv.com.cn]
> > > > Sent: Tuesday, 5 August 2003 3:16 PM
> > > > To: Scott Morris; Tom Young; ccielab@groupstudy.com
> > > > Subject: Re: could ping but couldn't traceroute
> > > >
> > > > hi,scott:
> > > > i think i can not agree with you.i think tracert is also using icmp
> > >echo.you
> > > > can sniffer it using netxray or deb ip pac det on the router. thx
> > > > huangg
> > > > email: bgv@ggv.com.cn
> > > > Tel: 010-62984668-3912
> > > > ----- Original Message -----
> > > > From: "Scott Morris" <swm@emanon.com>
> > > > To: "'Tom Young'" <gitsyoung@yahoo.co.jp>; <ccielab@groupstudy.com>
> > > > Sent: Monday, August 04, 2003 9:56 PM
> > > > Subject: RE: could ping but couldn't traceroute
> > > >
> > > >
> > > > > Traceroute uses high port udp as the transport. Ping uses ICMP.
> > > > >
> > > > > Access list or firewall rules in between permitted one but not the
> > > > > other.
> > > > >
> > > > > Scott
> > > > >
> > > > >
> > > > > -----Original Message-----
> > > > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> > Behalf
> > >Of
> > > > > Tom Young
> > > > > Sent: Monday, August 04, 2003 5:28 AM
> > > > > To: ccielab@groupstudy.com
> > > > > Subject: could ping but couldn't traceroute
> > > > >
> > > > >
> > > > > Hi, group
> > > > >
> > > > > A very strange question, for a global address, I
> > > > > could ping it, but couldn't traceroute it. WHY ?
> > > > > I really confused.
> > > > >
> > > > > Thanks alot
> > > > >
> > > > > User Access Verification
> > > > >
> > > > > Password:
> > > > > office01>en
> > > > > Password:
> > > > > office01#trace
> > > > > office01#traceroute 210.178.28.2
> > > > >
> > > > > Type escape sequence to abort.
> > > > > Tracing the route to 210.158.218.2
> > > > >
> > > > > 1 202.248.86.129 0 msec 0 msec 4 msec
> > > > > 2 133.160.0.1 12 msec 8 msec 12 msec
> > > > > 3 133.160.239.34 8 msec 12 msec 8 msec
> > > > > 4 133.160.191.133 20 msec 20 msec 20 msec
> > > > > 5 133.160.224.51 24 msec 16 msec 12 msec
> > > > > 6 133.160.30.32 16 msec 20 msec 20 msec
> > > > > 7 133.160.240.254 16 msec 16 msec 16 msec
> > > > > 8 133.160.12.74 21 msec 16 msec 12 msec
> > > > > 9 210.171.224.49 12 msec 12 msec 12 msec
> > > > > 10 158.205.192.197 16 msec 12 msec 12 msec
> > > > > 11 158.205.192.150 16 msec 20 msec 16 msec
> > > > > 12 158.205.224.46 16 msec 16 msec 16 msec
> > > > > 13 158.205.235.69 16 msec 16 msec 16 msec
> > > > > 14 158.205.200.74 36 msec 36 msec 28 msec
> > > > > 15 * * *
> > > > > 16 * * *
> > > > > 17 * * *
> > > > > 18 * * *
> > > > > 19 * * *
> > > > > 20 * * *
> > > > > 21 * * *
> > > > > 22 * * *
> > > > > 23 * * *
> > > > > 24 * * *
> > > > > 25 * * *
> > > > > 26 * * *
> > > > > 27 * * *
> > > > > 28 * * *
> > > > > 29 * * *
> > > > > 30 * * *
> > > > > office01#ping 210.178.28.2
> > > > >
> > > > > Type escape sequence to abort.
> > > > > Sending 5, 100-byte ICMP Echos to 210.158.218.2, timeout
> > > > > is 2 seconds:
> > > > > !!!!!
> > > > > Success rate is 100 percent (5/5), round-trip min/avg/max
> > > > > = 12/14/16 ms
> > > > > office01#
> > > > >
> > > > > __________________________________________________
> > > > > Do You Yahoo!?
> > > > > Yahoo! BB is Broadband by Yahoo! http://bb.yahoo.co.jp/
> > > > >
> > > > >
> > > > >
> > >_______________________________________________________________________
> > > > > You are subscribed to the GroupStudy.com CCIE R&S Discussion
> > Group.
> > > > >
> > > > > Subscription information may be found at:
> > > > > http://www.groupstudy.com/list/CCIELab.html
> > > > >
> > > > >
> > > > >
> > >_______________________________________________________________________
> > > > > You are subscribed to the GroupStudy.com CCIE R&S Discussion
> > Group.
> > > > >
> > > > > Subscription information may be found at:
> > > > > http://www.groupstudy.com/list/CCIELab.html
> > > >
> > > >
> > > >
> > _______________________________________________________________________
> > > > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> > > >
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > > >
> > > >
> > > >
> > _______________________________________________________________________
> > > > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> > > >
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > >_______________________________________________________________________
> > >You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> > >
> > >Subscription information may be found at:
> > >http://www.groupstudy.com/list/CCIELab.html
> >
> > _________________________________________________________________
> > MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.
> > http://join.msn.com/?page=features/virus
> >
> >
> > _______________________________________________________________________
> > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > _______________________________________________________________________
> > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:53 GMT-3