From: Ivan (limmti@yahoo.com.sg)
Date: Tue Aug 05 2003 - 02:51:58 GMT-3
Hi All,
Had a question on ODR
---------------------------
R2(P2P)--------FR--------R4(multipoint phy int )
I tried configuring ODR across the FR connection.
R2 is the Hub router and R4 is the stub router.
R4 can receive the default route advertise by R2 but R2 cannot see any of the stub router networks.
Below is the config:
R2 (Hub Router)
interface Serial0.24 point-to-point
ip address 163.40.24.1 255.255.255.252
frame-relay interface-dlci 104
router odr
R4 (Stub Router)
interface Serial1
ip address 163.40.24.2 255.255.255.252
encapsulation frame-relay
cdp enable
frame-relay map ip 163.40.24.1 401 broadcast
no frame-relay inverse-arp
!
!
interface Loopback0
ip address 200.4.4.4 255.255.255.255
!
interface Ethernet0
ip address 163.40.40.4 255.255.255.0
no keepalive
!
Any advice is appreciated
Thks
Ivan
Yahoo! Mobile
- Send free SMS from your PC!
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:53 GMT-3