From: Hunt Lee (huntl@webcentral.com.au)
Date: Mon Aug 04 2003 - 23:59:46 GMT-3
Hi Brian,
You have done it again :o) One of my ISDN routers is using a 12.0 code.
Thanks.
Hunt
-----Original Message-----
From: Brian Dennis [mailto:bdennis@internetworkexpert.com]
Sent: Monday, 4 August 2003 2:49 PM
To: Hunt Lee
Cc: ccielab@groupstudy.com
Subject: RE: ISIS with dialer watch?
Your configs should work (see below). What version of code are you
running on R2? If you are running older code (i.e. 12.0), try adding the
dialer-group command. There is a bug in older code that will not allow
any packets to be sent across an ISDN connection without it.
r2#ping 49.0001.0192.0168.0505.00
Type escape sequence to abort.
Sending 5, 100-byte CLNS Echos with timeout 2 seconds
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 36/37/40 ms
r2#
Rack12AS>5
[Resuming connection 5 to r5 ... ]
r5#
r5#ping 49.0001.0192.0168.0202.00
Type escape sequence to abort.
Sending 5, 100-byte CLNS Echos with timeout 2 seconds
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 36/48/88 ms
r5#
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:53 GMT-3