From: John Matijevic (matijevi@bellsouth.net)
Date: Mon Aug 04 2003 - 11:13:58 GMT-3
Hello Team,
Due to time constraints I was forced to remove the virtual-access interface,
after I did everything was functioning as normal.
Thanks again,
Matijevic
----- Original Message -----
From: "John Matijevic" <matijevi@bellsouth.net>
To: <ccielab@groupstudy.com>
Sent: Monday, August 04, 2003 9:06 AM
Subject: rip network not showing up on R4
> Hello Team,
> R3----R4 running RIP ver2,
> loopback on R3 not showing up on R4,
> loopback on R4 is showing up on R3,
> As part of debugging, the rip updates are being sent from R4 to R3, and R3
is
> receiving the updates. But R3 is not sending RIP updates, only receiving
> updates. And R4 is not receiving any updates because R3 is not sending any
> updates. I dont have anything specific as far as ip rip send version or ip
rip
> receive version, on either interface on either router. The only thing
unique
> about this situation is I am using a virtual-access interface, between the
2
> routers.
> Any suggestions here?
> Sincerely,
> Matijevic
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:52 GMT-3