From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sun Aug 03 2003 - 04:37:49 GMT-3
Hunt,
Map to the other side's NET and include the broadcast keyword in the
dialer map statement. Also if you need ISIS to trigger the call, use
"clns_is" in the dialer-list. Of course for dialer watch it isn't
needed.
If your ISIS is setup correctly you should be able to ping the other
side with CLNS.
Router#ping clns <other side's NET>
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Hunt Lee
Sent: Saturday, August 02, 2003 11:56 PM
To: 'Brian McGahan'
Cc: 'ccielab@groupstudy.com'
Subject: RE: ISIS with dialer watch?
HI Brian,
Is there anywhere you can pointed me to an e.g. of setting up ISIS over
ISDN? I know that I have to put in dialer map clns command, but what
value
should I put for the NSAP address?
THanks in advance,
Regards,
Hunt
-----Original Message-----
From: Brian McGahan [mailto:brian@cyscoexpert.com]
Sent: Thursday, 17 April 2003 11:56 AM
To: 'Niksa Tomulic'; ccielab@groupstudy.com
Subject: RE: ISIS with dialer watch?
Niksa,
With dialer-watch, there is no need for a dialer-list to specify
interesting traffic. The dialer-watch list is the interesting traffic
instead.
The config for dialer-watch with IS-IS will be the same as with
any other IP routing protocol, but don't forget to map CLNS on the
interface. Remember that with any multipoint non-broadcast interface,
you need a static protocol mapping for any protocol you are running on
that interface. Since IS-IS is part of the CLNS stack, not the IP
stack, you must do a dialer map for CLNS.
HTH
Brian McGahan, CCIE #8593
Director of Design and Implementation
brian@cyscoexpert.com
CyscoExpert Corporation
Internetwork Consulting & Training
Toll Free: 866-CyscoXP
Outside US: 847.674.3392
Fax: 847.674.2625
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Niksa Tomulic
> Sent: Wednesday, April 16, 2003 6:32 PM
> To: ccielab@groupstudy.com
> Subject: ISIS with dialer watch?
>
> Hi list
> Is it possible to use dialer watch scenario with ISIS?
> I remember seeing some posts, but God himself can't find them when I
> need them
>
> dialer-list 1 protocol clns_is permit
> Will define right traffic as interesting, but how to stop it being up
> all the time?
>
> thnx
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:52 GMT-3