From: Peng Zheng (zpnist@yahoo.com)
Date: Sat Aug 02 2003 - 03:31:40 GMT-3
Under Section VI in unnamed lab of CCIE practical
Studies:
It said the link brcomes active only upon changes in
the routing table. Only TCP traffic should bring up
the link, routing updates should not.
The solution is to use dialer watch and make it a stub
area.
and it's dialer-list:
access-list 131 permit icmp 133.7.10.0 0.0.0.255
133.7.28.0 0.0.0.255 echo
access-list 131 permit icmp 133.7.10.0 0.0.0.255
133.7.28.0 0.0.0.255 echo-reply
dialer-list 1 protocol ip list 131
Why?
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:51 GMT-3