From: Jim Phillipo (jim.phillipo@guardent.com)
Date: Fri Aug 01 2003 - 10:15:55 GMT-3
I have a neighbor statement configured but it is still broadcasting. Is
neighbor statement a v2 only command ?
!
router rip
version 1
passive-interface default
no passive-interface Ethernet0
network 172.16.0.0
neighbor 172.16.200.20
!
ip classless
no ip http server
!
!
!
line con 0
transport input none
line aux 0
line vty 0 4
login
!
--More--
03:52:10: RIP: ignored v2 packet from 172.16.200.7 (illegal version)
03:52:10: RIP: sending v1 update to 255.255.255.255 via Ethernet0
(172.16.200.5)
03:52:10: RIP: build update entries
03:52:10: subnet 172.16.53.0 metric 1
03:52:10: subnet 172.16.105.0 metric 1
03:52:10: RIP: sending v1 update to 172.16.200.20 via Ethernet0
(172.16.200.5)
03:52:10: RIP: build update entries
03:52:10: subnet 172.16.53.0 metric 1
03:52:10: subnet 172.16.105.end
Jim Phillipo, CCNP, CCDP
Sr. Internetworking Engineer
W: 401.456.1821 F: 401.456.0599 M: 508.982.8923
90 Royal Little Drive, Providence, RI 02904
www.guardent.com
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:51 GMT-3