From: Snow, Tim (timothy.snow@eds.com)
Date: Fri Aug 01 2003 - 07:05:51 GMT-3
I don't believe the 3550's support policy routing at all. Take a look at
the unsupported commands for the 3550..
Tim
-----Original Message-----
From: wwwjjang@chol.com [mailto:wwwjjang@chol.com]
Sent: Friday, August 01, 2003 3:42 AM
To: ccielab@groupstudy.com
Subject: is it possible?
Hi..every one..
i have no C3550 switchs.
so i want to know that it's possible to configure "local policy routing'
in the Cat3550..
This configuration is right in Cat 3550 ??
C3550(SVI-10:10.10.10.1)-----(eo 10.10.10.2)R1
---------------------------------------------------
ip routing
!
interface vlan 10
ip address 10.10.10.1 255.255.255.0
!
ip local policy route-map test
!
route-map test permit 10
set ip next-hop 10.10.10.2
----------
key-point
----------
when there is no any routing protocol,static routing,default-routing
in C3550, I want to send all traffic to the R1.
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:51 GMT-3