From: jfaure@sztele.com
Date: Thu Jul 31 2003 - 05:39:23 GMT-3
Hi all:
I4ve posted the following question (see attached mail) past month, but no
replies.
Please, can anybody answer it? Am i totally wrong with my impressions?
Please help
Regards
Juan Faure Ferrer
email: jfaure@sztele.com
Lmnea de Negocio de Telematica y CC
Ingeniero de Integracisn de Redes y Sistemas
----------------------------------------------------------------------------
SOLUZIONA TELECOMUNICACIONES
Servicios Profesionales de UNION FENOSA
Jerez, 3
28016 MADRID
tel 91 579 30 00 fax 91 350 72 83
---------------------------------------------------------------------------
----- Remitido por Juan Faure Ferrer/Telematica/SZT con fecha 31/07/03
10:37 -----
Juan Faure
Ferrer Para: ccielab@groupstudy.com
cc:
24/06/03 10:44 Asunto: QoS on Frame Relay interfaces
Hi folks:
I'm studying several docs about the different QoS features supported by
Frame Relay interfaces and specially about how to implement each one, and I
have some doubts relating to this:
1-If they said to implement CBWFQ on a frame relay interface, do you MUST
also enable Frame Relay Traffic Shaping?? If you see this link:
http://www.cisco.com/en/US/partner/tech/tk543/tk545/technologies_tech_note09186a008009489a.shtml
then you can read (for the 7200, 3600 and 2600 series routers): "On these
platforms, CBWFQ on Frame Relay interfaces is always in the context of
Frame Relay TS." And you can see that the config samples contain a FRTS
config too, besides the tipical commands related to CBWFQ.
I'm wondering, is this document is only related to 12.2 IOS? What must i do
in the lab where (by the moment if you believe the last news about changes)
the 12.1 release is only tested?
2- Some similar issue I've seen with RSVP on Frame Relay interfaces. I've
found a doc (but now this is a doc of 12.2 ios release) where you can see
that YOU MUST enable FRTS if you are using RSVP on Frame Relay. You can see
this in:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fqos_c/fqcprt5/qcfrsvfr.htm
In this case, i'm wondering if this rule applies to 12.1 release too, or
not. What do you do if they say:configure RSVP for this F relay interface,
but they don't specify anything about TS parameters?
Anyone can provide some help here? Maybe am i missing somethig important?
Regards
Juan Faure Ferrer
email: jfaure@sztele.com
Lmnea de Negocio de Telematica y CC
Ingeniero de Integracisn de Redes y Sistemas
----------------------------------------------------------------------------
SOLUZIONA TELECOMUNICACIONES
Servicios Profesionales de UNION FENOSA
Jerez, 3
28016 MADRID
tel 91 579 30 00 fax 91 350 72 83
---------------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:59 GMT-3