From: R. Adjakou (radjakou@cfao.sn)
Date: Mon Jul 28 2003 - 12:24:27 GMT-3
ACL are active only for packets crossing the router. Packets originated from
the router are not concerned.
Roberto Adjakou
----- Original Message -----
From: "Yu Kay" <kaykkyu@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, July 27, 2003 2:54 PM
Subject: reflexive access-list
> Hi,
>
> I have a question about reflexive access-list.
> For example,
>
> routerA (S0)----- routerB
>
> I try to describe my problem in a simplest example.
> Each router use default route point to the other.
> Before I put the following 'access-list' on routerA,
> routerA can telnet to routerB.
>
> int s0
> ip access-group outbound out
> ip access-group inbound in
>
> access-list extended inbound
> evaluate test
> access-list extended outbound
> permit tcp any any reflect test
>
>
> Please give me some hints
>
> Kay
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
> http://sitebuilder.yahoo.com
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:56 GMT-3