From: Mike Williams (ccie2be@swbell.net)
Date: Mon Jul 28 2003 - 11:10:27 GMT-3
If you have th PVC configured on a point-to-point subinterface, couldn't
you just use the 'mtu' interface command?
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
finter_r/irfmdl.htm#1017787
Mike W.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
wwwjjang@chol.com
Sent: Monday, July 28, 2003 5:48 AM
To: ccielab@groupstudy.com
Subject: How i change the MTU size?
Hi! everyone..
I was confused by this quesution..
Q> You have to lower the MTU size from 1500 to 750 over the frame
for a particular frame-relay PVC..
-----------------------------------
My Answer> this is right???
-----------------------------------
First> i config the FRTS ,frame-relay interface dlci #,class
on the FR-int.
Second> i use the command 'frame-relay fragment 750' in the FR-class .
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:55 GMT-3