From: Jason Cash (cash2001@swbell.net)
Date: Mon Jul 28 2003 - 10:25:03 GMT-3
I am doing a lab and one of the requirements is "R7 VoIP users will get busy
tone if R7 cannot reach r4". The solution provides the 'busyout monitor
Ethernet' which makes sense. But I am running a 2620 and have a
FastEthernet interface. This option does not appear available! What gives
and how can I accomplish this?
r7(config)#voice-port 1/0/0
r7(config-voiceport)#busyout monitor ?
Serial Serial
probe busyout on probe results to the specified IP address
r7#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-JO3S56I-M), Version 12.1(5)T14, RELEASE
SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 24-Dec-02 19:18 by ccai
Image text-base: 0x80008088, data-base: 0x814D1998
ROM: System Bootstrap, Version 12.2(10r)1, RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-IS56I-M), Version 12.1(19), RELEASE SOFTWARE
(fc1)
r7 uptime is 1 day, 9 hours, 58 minutes
System returned to ROM by reload
System restarted at 22:25:48 CST Sat Jul 26 2003
System image file is "tftp://150.50.50.12/c2600-jo3s56i-mz.121-5.T14.bin"
r7#shi
Interface IP-Address OK? Method Status
Protocol
FastEthernet0/0 150.50.50.7 YES manual up
up
Serial0/0 136.10.78.7 YES manual up
up
Loopback0 136.10.7.7 YES manual up
up
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:55 GMT-3