From: Jason Cash (cash2001@swbell.net)
Date: Sun Jul 27 2003 - 04:01:36 GMT-3
This has got me a bit confused. Switch 2 will always receive routes from
R5, modifying cost or link bw is not allowed on any of the OSPF routers:
R5 RouterID 136.10.5.5
R6 RotuerID 136.10.6.6
The solution on Sw2 is:
router ospf 1
router-id 136.10.20.2
distance 109 136.10.5.5 0.0.0.0 2
access-list 2 permit any
As you can see only 1 route is distance correctly, all the others just
assume the default of 110:
switch2#si os
136.10.0.0/16 is variably subnetted, 13 subnets, 5 masks
O E2 136.10.2.0/24 [110/20] via 136.10.56.5, 00:04:39, Vlan56
[110/20] via 136.10.56.6, 00:04:39, Vlan56
O E2 136.10.1.0/24 [110/20] via 136.10.56.5, 00:04:39, Vlan56
[110/20] via 136.10.56.6, 00:04:39, Vlan56
O E2 136.10.12.0/24 [110/20] via 136.10.56.5, 00:04:39, Vlan56
[110/20] via 136.10.56.6, 00:04:39, Vlan56
O E2 136.10.24.0/29 [110/20] via 136.10.56.5, 00:04:39, Vlan56
[110/20] via 136.10.56.6, 00:04:40, Vlan56
O IA 136.10.100.6/32 [109/121] via 136.10.56.5, 00:04:40, Vlan56
O IA 136.10.100.5/32 [109/1] via 136.10.56.5, 00:04:40, Vlan56
O IA 136.10.100.2/32 [109/65] via 136.10.56.5, 00:04:40, Vlan56
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:54 GMT-3