From: wwwjjang@chol.com
Date: Sat Jul 26 2003 - 22:19:20 GMT-3
My solution of the CAR-question is right??
Who knows the solution help me...!!
Q1>
-Configure R13 such that all traffic to WEB,SMTP,POP3 and Telnet inbound on
int e0 is limited to 1MBps with bursts allowed exceeding the limit by 24Kbps.
All IP packets matching the services above that exceed the rate decribed are
to be dropped.(i don't understand this question..)
-Configure such that traffic be allowed to burst by 24000 before some traffic
exceeds that rate limit and is dropped.And any other traffic that bursts by
32000 will exceed the rate limit and is dropped.
(i don't understand this question..)
-------------
My answer>
-------------
interface Ethernet0
ip address 172.168.10.33 255.255.255.224
rate-limit input access-group 111 1000000 24000(?) 32000(?) conform-action
transmit exceed-action drop
!
access-list 111 permit tcp any any eq www
access-list 111 permit tcp any any eq smtp
access-list 111 permit tcp any any eq pop3
access-list 111 permit tcp any any eq telnet
- if i configure the CAR to the int e0, i must know CIR,Normal-burst size and
Exceed-burst size.
In this Question, CIR is 1MB. but What's the values of the Normal-nurst &
Exceed-burst size ?
- What;s the CAR-parametets(CIR.Normal-burst,Exceed-burst) of the remaining
traffics ? (except WWW,SMTP,POP3,Telnet)
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:54 GMT-3