From: Roberto Adjakou (radjakou@cfao.sn)
Date: Wed Jul 23 2003 - 17:06:27 GMT-3
BB
That is called reverse dns lookup. And I think u cannot configure a
router (Cisco one) to do that!
Cordialement/Best regards;
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
Roberto Adjakou
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
-----Message d'origine-----
De : balaji.balakrishnan [mailto:balaji.balakrishnan@swift.com]
Envoyi : mercredi 23 juillet 2003 19:37
@ : Mustafa Bayramov (ICT/IT)
Cc : ccielab@groupstudy.com
Objet : Re: sending syslog using domain names
Group,
Does nobody read the question well or am I not putting the question is
right words.
Question is not about configuring basic logging or configuring name
servers. Assuming that they were already configured, the
question is that how to configure the router to send domain names
instead of IP address in the syslog messages like,
" neighbor loopack.1.cpe down" instead of " neighbor 1.1.1.1 down"
Is that clear ??
-bala.
"Mustafa Bayramov (ICT/IT)" wrote:
> comm_serve_r4$(config)#logging ?
> Hostname or A.B.C.D IP address of the logging host --- > you can
do it
> buffered Set buffered logging parameters
> console Set console logging level
> exception Limit size of exception flush output
> facility Facility parameter for syslog messages
> history Configure syslog history table
> monitor Set terminal line (monitor) logging level
> on Enable logging to all supported destinations
> rate-limit Set messages per second limit
> source-interface Specify interface for source address in logging
> transactions
> trap Set syslog server logging level
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> balaji.balakrishnan
> Sent: Wednesday, July 23, 2003 2:48 PM
> To: Jonathan V Hays
> Cc: ccielab@groupstudy.com
> Subject: Re: sending syslog using domain names
>
> Jonathan,
>
> You did not read the question well.
> I did not asked how to configure the router as dns client.
> The question is how to configure the router to query DNS so that it
would
> report domain name instead of IP address in the syslog
> messages.
> By default, router would not do so even when you configured
name-servers.
>
> Rgds,
> Bala.
>
> Jonathan V Hays wrote:
>
> > Information on configuring your Cisco router as a DNS client is here
-
> >
> >
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
> > fipr_c/ipcprt1/1cfipadr.htm#1001317
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> > balaji.balakrishnan
> > Sent: Wednesday, July 23, 2003 12:34 PM
> > To: ccielab@groupstudy.com
> > Subject: sending syslog using domain names
> >
> > Hi group,
> >
> > I have a specific syslog requirement. Is it possible to configure a
> > router to send syslog with domain name instead of IP address.
> > For example, let say router is sending bgp down event as " neighbor
> > 1.1.1.1 down". Let say we have DNS server having entry 1.1.1.1
> > --> Loopack1.cpe1.
> > Is it possible to configure router to refer DNS server and resolve
the
> > IP with name and send the syslog as " neighbor Loopack1.cpe1
> > down.
> >
> > Thanks for your help.
> >
> > Rgds,
> > Bala.
> >
> > [GroupStudy removed an attachment of type
application/x-pkcs7-signature
> > which had a name of smime.p7s]
> >
> >
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:50 GMT-3