From: R&S Groupstudy (rsg@synergy-networking.co.uk)
Date: Wed Jul 23 2003 - 17:05:24 GMT-3
you can't - and I think most people were just trying to help
sorry
Adam
> ----------
> From: balaji.balakrishnan[SMTP:balaji.balakrishnan@swift.com]
> Reply To: balaji.balakrishnan
> Sent: Wednesday, July 23, 2003 8:37 PM
> To: Mustafa Bayramov (ICT/IT)
> Cc: ccielab@groupstudy.com
> Subject: Re: sending syslog using domain names
>
> Group,
>
> Does nobody read the question well or am I not putting the question is
> right words.
> Question is not about configuring basic logging or configuring name
> servers. Assuming that they were already configured, the
> question is that how to configure the router to send domain names instead
> of IP address in the syslog messages like,
> " neighbor loopack.1.cpe down" instead of " neighbor 1.1.1.1 down"
>
> Is that clear ??
>
> -bala.
>
> "Mustafa Bayramov (ICT/IT)" wrote:
>
> > comm_serve_r4$(config)#logging ?
> > Hostname or A.B.C.D IP address of the logging host --- > you can do
> it
> > buffered Set buffered logging parameters
> > console Set console logging level
> > exception Limit size of exception flush output
> > facility Facility parameter for syslog messages
> > history Configure syslog history table
> > monitor Set terminal line (monitor) logging level
> > on Enable logging to all supported destinations
> > rate-limit Set messages per second limit
> > source-interface Specify interface for source address in logging
> > transactions
> > trap Set syslog server logging level
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > balaji.balakrishnan
> > Sent: Wednesday, July 23, 2003 2:48 PM
> > To: Jonathan V Hays
> > Cc: ccielab@groupstudy.com
> > Subject: Re: sending syslog using domain names
> >
> > Jonathan,
> >
> > You did not read the question well.
> > I did not asked how to configure the router as dns client.
> > The question is how to configure the router to query DNS so that it
> would
> > report domain name instead of IP address in the syslog
> > messages.
> > By default, router would not do so even when you configured
> name-servers.
> >
> > Rgds,
> > Bala.
> >
> > Jonathan V Hays wrote:
> >
> > > Information on configuring your Cisco router as a DNS client is here -
> > >
> > >
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
> > > fipr_c/ipcprt1/1cfipadr.htm#1001317
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > > balaji.balakrishnan
> > > Sent: Wednesday, July 23, 2003 12:34 PM
> > > To: ccielab@groupstudy.com
> > > Subject: sending syslog using domain names
> > >
> > > Hi group,
> > >
> > > I have a specific syslog requirement. Is it possible to configure a
> > > router to send syslog with domain name instead of IP address.
> > > For example, let say router is sending bgp down event as " neighbor
> > > 1.1.1.1 down". Let say we have DNS server having entry 1.1.1.1
> > > --> Loopack1.cpe1.
> > > Is it possible to configure router to refer DNS server and resolve the
> > > IP with name and send the syslog as " neighbor Loopack1.cpe1
> > > down.
> > >
> > > Thanks for your help.
> > >
> > > Rgds,
> > > Bala.
> > >
> > > [GroupStudy removed an attachment of type
> application/x-pkcs7-signature
> > > which had a name of smime.p7s]
> > >
> > >
> _______________________________________________________________________
> > > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> > >
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> _______________________________________________________________________
> > > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> > >
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > [GroupStudy removed an attachment of type application/x-pkcs7-signature
> > which had a name of smime.p7s]
> >
> > _______________________________________________________________________
> > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> [GroupStudy removed an attachment of type application/x-pkcs7-signature
> which had a name of smime.p7s]
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:50 GMT-3