RE: sending syslog using domain names

From: Mustafa Bayramov (ICT/IT) (mustafa@azercell.com)
Date: Wed Jul 23 2003 - 17:15:23 GMT-3


comm_serve_r4$(config)#logging ?
  Hostname or A.B.C.D IP address of the logging host --- > you can do it
  buffered Set buffered logging parameters
  console Set console logging level
  exception Limit size of exception flush output
  facility Facility parameter for syslog messages
  history Configure syslog history table
  monitor Set terminal line (monitor) logging level
  on Enable logging to all supported destinations
  rate-limit Set messages per second limit
  source-interface Specify interface for source address in logging
transactions
  trap Set syslog server logging level
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
balaji.balakrishnan
Sent: Wednesday, July 23, 2003 2:48 PM
To: Jonathan V Hays
Cc: ccielab@groupstudy.com
Subject: Re: sending syslog using domain names

Jonathan,

You did not read the question well.
I did not asked how to configure the router as dns client.
The question is how to configure the router to query DNS so that it would
report domain name instead of IP address in the syslog
messages.
By default, router would not do so even when you configured name-servers.

Rgds,
Bala.

Jonathan V Hays wrote:

> Information on configuring your Cisco router as a DNS client is here -
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
> fipr_c/ipcprt1/1cfipadr.htm#1001317
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> balaji.balakrishnan
> Sent: Wednesday, July 23, 2003 12:34 PM
> To: ccielab@groupstudy.com
> Subject: sending syslog using domain names
>
> Hi group,
>
> I have a specific syslog requirement. Is it possible to configure a
> router to send syslog with domain name instead of IP address.
> For example, let say router is sending bgp down event as " neighbor
> 1.1.1.1 down". Let say we have DNS server having entry 1.1.1.1
> --> Loopack1.cpe1.
> Is it possible to configure router to refer DNS server and resolve the
> IP with name and send the syslog as " neighbor Loopack1.cpe1
> down.
>
> Thanks for your help.
>
> Rgds,
> Bala.
>
> [GroupStudy removed an attachment of type application/x-pkcs7-signature
> which had a name of smime.p7s]
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

[GroupStudy removed an attachment of type application/x-pkcs7-signature
which had a name of smime.p7s]



This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:50 GMT-3