From: Robert Laidlaw (laidlaw@consecro.com)
Date: Tue Jul 22 2003 - 11:48:21 GMT-3
rj48 cross over. pins are as follow with a standard rj-45 plug. 12345678
45312678
or colors
org/wht--org---green/wht--blue--blue/wht--grn--brn/wht--brn
blue----blue/wht---geeen/wht----org/wht---org---grn---brn/wht---brn
you can just take a rj-45 straight through, chop off one end, and make the
changes on that end.
-rob
----- Original Message -----
From: "Richard Davidson" <rich@myhomemail.net>
To: "groupstudy" <ccielab@groupstudy.com>
Sent: Tuesday, July 22, 2003 9:28 AM
Subject: back to back CSU/DSU
> Does anyone know if you can connect a router with a
> csu interface to another router with a csu interface.
> My guess is that the pin-outs must be flipped. Does
> anyone know the pin-outs to do this.
> Rich
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:48 GMT-3