From: David Fairman (DFairman@duke-energy.com)
Date: Mon Jul 21 2003 - 18:10:33 GMT-3
What version of the client are you using? There were issues with MTU
mismatch in v3.5. v3.6 was better and v4.0 is better again. Try that...
David Fairman
Senior Network Engineer
Duke Energy International - Asia Pacific
Direct: +61 2 8223 2148
Mobile: 0438 175 722
Fax: +61 2 8223 2001
E-mail: dfairman@duke-energy.com
Web: http://www.duke-energy.com.au
IMPORTANT - This email and any attachments may be confidential and
privileged and exempt from disclosure under relevant law. If you are not
the named addressee(s) or you have received it in error, please contact
Duke Energy International on +61 2 8223 2000 and delete all copies. Any
unauthorised copying or distribution of it is prohibited. Before opening or
using attachments, check them for viruses and defects. Duke Energy
International's liability is limited to resupplying any affected
attachments.
Tomasz Szymanski
<tomasz.szymanski To: ccielab@groupstudy.com
@trecom.pl> cc:
Sent by: Subject: VPN Client MTU problems
nobody@groupstudy
.com
07/22/2003 06:52
AM
Please respond to
Tomasz Szymanski
Hello,
I have some problems with Ciesco Secure VPN Client. When I connect to my
customer's site from the local network everything is ok, but when I
connect through dial-up networking I can't get to inside hosts (login to
firewall is ok).
I thought it's connected with MTU problem but I tried MTu=1300 and it
doesn't work.
Someone had this problem before?
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:48 GMT-3