From: Oliver Ziltener (ziltener@netcloud.ch)
Date: Mon Jul 21 2003 - 06:43:02 GMT-3
And dont forget a second filename, in the case when the fist become corrupted
during download!
Example:
tftp-server flash c2500-j-l.112-23.bin alias cisco2-2500
U will see the special filename cisco2-2500 when you boot the box!
Have fun
Oliver
-----Urspr|ngliche Nachricht-----
Von: Snow, Tim [mailto:timothy.snow@eds.com]
Gesendet: Montag, 21. Juli 2003 04:26
An: 'Jonathan V Hays'; 'Brown, Patrick (NSOC-OCF}'; 'Poor Ghost ';
ccielab@groupstudy.com
Betreff: RE: TFTP question
I think Patrick might have wrote the *.* because he might not have known the
IOS that your running and meant that you specify the actual file name that
you wish to "serve up"
Tim
-----Original Message-----
From: Jonathan V Hays [mailto:jhays@jtan.com]
Sent: Sunday, July 20, 2003 9:17 PM
To: 'Brown, Patrick (NSOC-OCF}'; 'Poor Ghost '; ccielab@groupstudy.com
Subject: RE: TFTP question
Patrick,
Are you sure this will it work (using the '*' as a wildcard)? My 2511
complains when I try it whereas using the actual file name seems to
work.
tsrv#sh flash:
System flash directory:
File Length Name/status
1 16370276 /c2500-jos56i-l.121-19.bin
[16370340 bytes used, 406876 available, 16777216 total]
16384K bytes of processor board System flash (Read ONLY)
tsrv#conf t
Enter configuration commands, one per line. End with CNTL/Z.
tsrv(config)#tftp-server flash:c2500-jos56*.*
Warning: flash:c2500-jos56*.* does not exist. Command retained.
tsrv(config)#tftp-server flash:c2500-jos56i-l.121-19.bin
tsrv(config)#
-Jonathan
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Brown, Patrick (NSOC-OCF}
Sent: Saturday, July 19, 2003 2:13 PM
To: 'Poor Ghost '; 'ccielab@groupstudy.com '
Subject: RE: TFTP question
try this on r5
tftp-server flash:c2600-mz-*.*
Pb
-----Original Message-----
From: Poor Ghost
To: ccielab@groupstudy.com
Sent: 7/19/2003 2:54 AM
Subject: TFTP question
Hi,all.
R5 as a TFTP server,R5 can transmit IOS image to R3.
The name of the IOS image is c2600-mz-image.
But config-register can not be modified on R3.
And the configuration of R3 can not be modified too.
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:47 GMT-3