From: Jonathan V Hays (jhays@jtan.com)
Date: Sun Jul 20 2003 - 22:17:16 GMT-3
Patrick,
Are you sure this will it work (using the '*' as a wildcard)? My 2511
complains when I try it whereas using the actual file name seems to
work.
tsrv#sh flash:
System flash directory:
File Length Name/status
1 16370276 /c2500-jos56i-l.121-19.bin
[16370340 bytes used, 406876 available, 16777216 total]
16384K bytes of processor board System flash (Read ONLY)
tsrv#conf t
Enter configuration commands, one per line. End with CNTL/Z.
tsrv(config)#tftp-server flash:c2500-jos56*.*
Warning: flash:c2500-jos56*.* does not exist. Command retained.
tsrv(config)#tftp-server flash:c2500-jos56i-l.121-19.bin
tsrv(config)#
-Jonathan
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Brown, Patrick (NSOC-OCF}
Sent: Saturday, July 19, 2003 2:13 PM
To: 'Poor Ghost '; 'ccielab@groupstudy.com '
Subject: RE: TFTP question
try this on r5
tftp-server flash:c2600-mz-*.*
Pb
-----Original Message-----
From: Poor Ghost
To: ccielab@groupstudy.com
Sent: 7/19/2003 2:54 AM
Subject: TFTP question
Hi,all.
R5 as a TFTP server,R5 can transmit IOS image to R3.
The name of the IOS image is c2600-mz-image.
But config-register can not be modified on R3.
And the configuration of R3 can not be modified too.
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:46 GMT-3